Fire Marshal

The campus Fire Marshal is the authority having jurisdiction for fire-safety at Southern Utah University. Fire prevention duties include conducting routine inspections of campus buildings and addressing fire-safety concerns and questions brought up by building occupants or other campus personnel. Fire-safety training is provided to students, faculty, and staff upon request. The fire marshal also reviews documents for new construction, remodeling and renovations, and is responsible for fire protection systems testing and inspections. 

For Fire Training, contact the SUU Fire Marshal’s Office to request. 

Quinn Mathews
Fire Marshal
mathews_q@suu.edu
(435) 559-4602

Tim Roy
Assistant Fire Marshal
roy@suu.edu
(435) 559-0489

SUU Fire Marshal’s office is committed to fire prevention and life safety. The list below indicates ways in which SUU ensures that the buildings meet fire code and are safe for all students, faculty, and staff.

  • Interpreting and enforcing Utah State adopted fire and life safety codes.
  • Plan reviews for all proposed construction and remodel projects.
  • Annual fire safety inspections for all buildings.
  • Quarterly testing and inspection of sprinkler systems.
  • Monthly inspections of fire extinguishers in all buildings.
  • Kitchen hood cleaning every six months.
  • Testing of residential smoke detectors in dorm rooms.
  • Annual fire hydrant flow.

Tips to help SUU Fire Marshal’s office meet fire code in buildings:

  • No storage above 18” in a building that is sprinkled.
  • No storage above 24” in a non-sprinkled building.
  • Clear area in front of fire extinguishers and exit discharge.
  • Keep fire rated doors from being wedged open.
  • No storage in stairwells and exit discharge.
  • Keep the occupancy load in rooms to fire code.
  • Contact Fire Marshal’s office before any event that requires inspection.
  • No candles, candle warmers, scented plug in devices in state owned buildings.
  • Live Christmas trees are prohibited in campus buildings.
  • Keep office and building space clean and free of combustibles.

Permits for all activities controlled by the Fire Marshal’s office can be obtained by calling (435) 559-4602 or (435) 559-0489. Please be prepared to allow up to 48 hours advanced notice for any permit inspection/request.

The following is a list of activities currently requiring a permit from the SUU Fire Marshal’s Office:

  • Hotworks: Any welding, soldering, torch cutting inside or on any SUU buildings.
  • Pyrotechnics: Any outside/inside pyrotechnic display requires a permit from the Cedar City Fire Marshal, proof of insurance, and approval of the SUU Fire Marshal’s office. No club or organization affiliated with SUU shall be allowed to have bonfires on or off campus. No open flame demonstrations are permitted inside of any structure, such as fire dancing.
  • Theatrical fog/haze machines: Any machine that creates theatrical smog/haze for theatrical performances shall be inspected and approved by SUU Fire Marshal’s office prior to any performance/use. 
  • Theatrical Props: Any theatrical props using candles, torches, or flash paper shall be approved by the SUU Fire Marshal’s office.
  • Events:  Any major concert, dance, or club event altering egress of a building shall be approved prior to event.
  • Candles: Candles, candle warmers, scented plug in devices shall not be used in any structure.
  • Christmas trees: Live Christmas trees are prohibited in any structure.
  • Space Heaters: The first thing that should take place if heat is not sufficient to maintain a comfortable working temperature in your work area is to let Facilities Management know that there is a problem by submitting a work order or by calling 435-865-8690. If they cannot resolve the problem, the use of a space heater is allowable; however, they need to be approved through campus Safety and Risk Management and meet the Utah Administrative Code R23-19-4-5 by meeting the following requirements:

The space heater shall:

1. not exceed 1500 watts at its highest setting;
2. be equipped with a self-limiting element temperature setting for the ceramic elements;
3. have a tip-over safety device;
4. be equipped with a built-in timer not to exceed eight hours per setting;
5. be equipped with a programmable thermostat; and
6. be equipped with an overheat protection feature.